ROTARY KEYBOARD TRAY

The new rotary keyboard tray is ideal for 19" cabinets. This tray ensures that the keyboard can be easily drawn out and used, even when it is wider than the entry into the rack. There is also enough for a mouse to be placed on the tray.

HEAVY DUTY SHELVES

For applications where heavy loads up to 200lbs, have to be supported.

SLIDING SHELVES

Sliding Shelves are provided with telescopic slides for 19" mounting These are useful when equipment placed on the shelves is to be drawn out for easy accessibility during servicing. Load capacity is 65lbs

CANTILEVER SHELVES (Compatible with all racks)

These shelves are useful for light, non-19" wide equipment. They are fixed to the front mounting angles and have a load capacity of 45lbs. They occupy 2U height.

VERTICAL CABLE MANAGER 24U-42U

Vertical Cable manager fits at the rear of the rack, to enable cables to be drawn along the height of the rack, where necessary from the slots. It comes with a cover, to keep the cables within the slotted Duct.

1U CAT.5 CABLE MANAGEMENT PANEL

19" cable manager is fitted with loops, which support and control the cables. Cables can be passed through the manager in horizontal direction in an organized manner.

MS BLANK PANEL (Compatible for all racks)

Blank 19"panels are useful for covering unused space at the front of the cabinet. They are made of 1.6mm thick steel sheets and are powder coated light gray. (RAL 7035)

SCREW ADJUSTABLE LEGS

Screw adjustable legs allow the cabinet to be leveled on uneven surfaces. 

CASTORS( Light Duty ) 

Castors are a useful optional item for providing mobility to floor standing cabinets. These castors have foot operated brakes. They are meant for light duty cabinets only. Four castors have to be ordered for each cabinet.

CASTORS (Heavy Duty)

Castors are useful for providing mobility to the cabinet. They are available in standard version and also with foot-operated brakes. When leveling legs are to be used with castors, special mounting brackets are required.

EARTHING KIT

Cooper Earthing Bars and Straps are available for providing good quality electrical ground connections. Earthing brackets are available on all side panels and steel doors. These can be used for connecting side panels or doors to electrical ground bar by means of the electrical straps.

BAYING KIT (Cyber Rack)

Any number of cabinets can be coupled together side by side. The Coupling Hardware set consists of a sturdy steel plate and fixing hardware. Between four and six sets are needed for each pair of cabinets to be coupled together, depending on the height of the cabinet.

CHASSIS SUPPORTS

These chassis supports are designed for equipment which are 19" compatible and need to be supported along their depth.

FAN TRAY (Compatible with all racks)

These fans trays are used to mount cooling fans (90CFM) at any convenient height inside the cabinet. The fan trays are useful when equipment mounted inside the cabinet needs forced air cooling. They come with 4 fans mounted, wired with cord and plug for ready use.

COOLING FAN ( For Table rack and Easi box )

Cooling Fans are used for thermal management inside the cabinets. These fans come wired with cord and plug for ready use . 

CAPTIVE MOUNTING HARDWARE(Compatible with all racks)

Front Panel Captive Hardware sets are required for fixing 19" rack equipment directly to the mounting angles in equipment cabinets.

Power Strips, 19" Mounting

Vertical Power Strips, occupy "0" U space

These power strips are mounted vertically at the rear of the cabinet and occupy 0, U space. Available in 15, 20 and 30amps  They come with 8, 12 and 24, sockets, and power cord.